The foam goes on metal surfaces well. Be sure to shake the cans a lot before applying. I’m applying it to my metal building and I purchase a case at a time. I can already tell a difference in the temperature and a lower sound deflection . Will highly recommend.
Fastcoat Insulation Spray Foam, Closed Cell Expanding Foam
It’s a metal building 30 x 40 H 12 cans will do four bases 3/4 of an inch thick , goes up very well, Plan on ordering more it’s about half the cost of someone coming in to do it and I can do it a little lot of time. Stuff works great thank you
Very easy to use.
Thank you! We are glad to hear you found it easy to use.
Spray foam was very easy to use and met all my expectations to seal in my 1832 home remodel. Coverage was excellent would recommend to anyone looking for a quality diy spray foam
Used this product to insulate a small shop ceiling. Worked great!
The gun provides the level of control you need to do the job correctly. Finished product resulted in clean beads of insulating foam that hardened to a robust seal. Cleanup was easy with the cleaning spray and Teflon coated gun. The extension tubes did not want to stay on, but in the end I didn’t really need them. I used this product and foam board to seal my rim joists. Looking forward to using the gun on a task that is less confining.
Ordered the 12 can kit with everything you need, working great and will be ordering more. Fast delivery and good price, cans are larger than most other companies.
User-friendly, and it did the job. The gloves were a little cheap. Which I did not use it was easy to spray and easy to clean up. I think it's a good product for the money. Full video at (crabbycraig1) on tiktok and YouTube
Needed to fill-in above the sill plates between the joists. Worked great by running layer on the outside wall and sides, then added solid foam and sealed the perimeter of the second layer. You would have to wait until the first layer hardened before applying a second layer if you didn’t want to use solid sheets, but just go back and look for voids and fill in with a second coat as needed. Just be careful to not spray away the uncured foam when your can is empty.
I'm very satisfied with the pressure of the spray and the expansion. I am planning on buying a lot more product for future projects. I am on a limited budget and it's a great alternative to hiring a company. I will get a little at a time.
This product worked very well for me and did an excellent job.
I spray foamed a small crawl space that was drafty in about an hour 👍🏼
Insulated my 20 ft shipping container easily and provided good coverage for the size. I’ll buy again!
The worst part of the whole spray foam in a can system is having to use the can upside-down. The can will absolutely be in the way while you're trying to spray or cause you to lean the can over to a point where it doesn't want to spray the foam. But, if you have the 40" gun, you can basically reach anywhere you need to without the can being in the way nor tilting too far and not spraying foam.
This is one of those times where spending more money upfront will save you a ton of time/effort while performing the job. The pic is an 8ft high sill plate bay that I was able to spray without the electrical wires being an issue, I didn't need a ladder, and the giant 24oz inverted can sitting on top of the gun never got close to the ceiling with the 40" reach.
Very nice to use. Does a great job. Love the product. Worth every penny.
Thank you! We're thrilled to hear you're enjoying the product!
Ordering 2 more cases. Easy to use and not that messy. The gun works great
Came with everything you can need and worked great for my small project. Foam was not as messy as I thought it would be.
The kit comes with everything you will need. Gloves and nozzles for each spray can, mask and coveralls. Product was easy to use and no issues with spraying. I've used other products and was uneven and did not provide good coverage.
My autocorrect inserted the wrong address and the customer service team was quick to resolve it prior to shipping.
I am sure if the product had not been lost in the mail. I would probably like it, but since I don’t have it, I don’t know. Still waiting to see if the post office will bring it since they said it was delivered.
Very easy to apply and clean up after. Did my basement walls and it seems to be working great to keep cold out..
I have a 30x30 cabin that I'm building and I'm using fast coat to seal the outer wall, the trick is, I live in northern NY, so I have to heat up the cabin before I foam so far so good, half the first floor is done with 34 cans, good stuff
Product was easy to apply and appeared to be of good quality. I used the upgraded gun and ended up not using the red tip applicator. With the red tip installed the spray pattern was inconsistent. I tried 3 different tips with the same outcome.
