Espuma en aerosol para aislamiento Fastcoat

• Closed Cell Hybrid Formula – Ensures durable and high-performance insulation with a dense structure.
• Class-A Fire-Rated Spray Foam – Complies with industry first ASTM E84 standards for fire and smoke spread resistance, improving building safety.
• Outstanding adhesion for most building materials.
• Easy to apply uneven, hard-to-reach surfaces where it is very hard to use traditional insulation materials.
• Excellent R-Value: 5.66 per inch and thermal insulation value 0.025 W/(m.K).
• Does not allow the formation of thermal bridges.
• Does not allow the formation of dew points.
• Yield up to 20 board feet for 1-inch thickness from one can if applied from a distance of ~16 inches with normal application speed. 
• Thanks to its dense structure, it stops water, air, bugs, etc.
• Can be painted.
• Color may vary.
• Every can includes a precision spray foam nozzle for efficient application.

• Application Temperature: 41°F (5 °C) to 86°F (30°C). 
• Can Storage Temperature: min. 41°F (5°C) max. 86°F (30°C).
• Temperature Resistance: -103°F (-75 °C) to 239°F (115°C).
• The cans should be kept at room temperature for at least 12 hours before the application if cans are stored below/above storage temperature.

🚨 Application TIP: Make sure the spray gun and the adapter are fully seated. Otherwise, only gas can come out first and the foam cannot come out when there is no gas inside.

• Structural elements of buildings, attics, crawl space, interior wall insulation, balcony, loggia, doors, window slopes, pipes, canals, and tank kind round surfaces, uneven and rough all surfaces.
• Roofs, attics, facades, foundations, basements, floors, interior walls, inter-floor overlappings, interior partitions, ceilings, and cellars.
• Car body and car trailers, boats, yachts, vessels, and all kinds of sea vehicles.
• Excellent R-Value: 5.66 per inch and thermal insulation value 0.025 W/(m.K), Yield up to 20 board feet for 1-inch thickness if applied from a distance of ~16 inches with normal application speed.
• A maximum of 1-inch thickness should be applied in a single batch.
• If more than 1-inch thickness application is needed, a minimum of 30 minutes should have waited between each surface, and the surface should be sprayed with water before the next application.

ventajas:

* Adhesión excepcional para la mayoría de los materiales de construcción,

*  Fácil de aplicar en superficies irregulares y difíciles de alcanzar donde se piensa utilizar materiales aislantes tradicionales,

* Excelente valor R: 5,66 por pulgada y valor de aislamiento térmico 0,025 W/(m.K),

*  No permite la formación de puentes térmicos.

*  No permite la formación de punto de rocío.

*  Rendimiento de hasta 20 pies tablares con 1 pulgada

espesor si se aplica desde una distancia de ~16 pulgadas con una velocidad de aplicación normal,

*  Gracias a su estructura densa, puede detener el agua, el aire, los insectos, etc.

* Se puede pintar.

Áreas de uso:

Elementos estructurales de edificios, áticos, sótanos, aislamiento de paredes interiores, balcones, logias, puertas, pendientes de ventanas, tuberías, canales,
y superficies redondas tipo tanque,
irregulares y ásperas todas las superficies,

Cubiertas, áticos, fachadas, cimientos,
sótanos, suelos, paredes interiores, solapes entre plantas, tabiques interiores, techos y sótanos. Carrocerías y remolques de automóviles, barcos, yates, embarcaciones y todo tipo de vehículos marítimos.

Instalar TDS