Espuma aislante en aerosol FastCoat, espuma expansiva de celda cerrada | Clasificación de resistencia al fuego clase A

• Exceptional Thermal Performance: Achieve superior energy efficiency with a thermal conductivity of 0.025 W/m.K (DIN 52612) and an impressive R-value of 5.66 per inch. This closed-cell foam minimizes heat transfer, keeping your indoors comfortable year-round.
• Class A Fire Rated (ASTM E84): Engineered for enhanced safety, FastCoat is tested to ASTM E84 and classified Class A, the top of the three surface burning classes.
• Seamless, Monolithic Application: Provides a continuous, gap-free insulation layer that eliminates thermal bridges and dew points, ensuring optimal insulation performance. It can be applied easily to uneven and hard-to-reach surfaces where traditional materials are impractical.
• High Yield & Cost-Effective: One can yields up to 20 board feet with a 1-inch thickness when applied correctly, offering excellent coverage and value.
• Strong Adhesion: Bonds excellently to all common building materials without the need for mechanical fasteners.
• Moisture & UV Resistance: The cured foam is moisture-resistant, helping to prevent mold growth. For outdoor applications, it is overpaintable and should be painted or coated to protect against UV discoloration.
• Ozone-Friendly: Does not contain propellant gases harmful to the ozone layer.
• Fast Curing: Features a skin time of 5±2 minutes and a cutting time of ≤40 minutes, with full cure achieved in 24 hours.
• Acoustic Performance: Contributes to noise reduction with an acoustic insulation rating of 48.8 dB at 1600Hz (EN ISO 717-1). Helps foster a calmer, more comfortable environment for your home or business.

• Buildings & Houses: Roofs, attics, facades, foundations, basements, floors, interior walls, inter-floor overlappings, interior partitions, ceilings, and cellars.
• Structural Elements: Balconies, loggias, doors, window slopes, pipes, canals, and tank-like round surfaces.
• Vehicles: Car bodies, car trailers, boats, yachts, vessels, and all types of sea vehicles.

1. PREP LIKE A PRO: Make sure the surface is clean, dry, and free of dust, oil, or debris. For temperatures above 32°F, lightly mist the surface with water. This simple step is crucial for improving adhesion and speeding up the curing process, ensuring you get the best coverage from your foam.

2. SUIT UP SMART: Safety isn’t optional. Wear gloves, goggles, and mask to protect yourself while working with the foam.

3. CHOOSE YOUR WEAPON: Select the right nozzle for your project:

• Tip A – For vertical surfaces like walls and gaps.
• Tip B – For horizontal surfaces like ceilings.

Press firmly until the tip clicks securely into place.

4. LOCK & LOAD: Bring the can to room temperature (around 68°F) for at least 24 hours before use. This ensures stable pressure, smooth spraying, consistent foam expansion, and a denser, higher-quality application.

• Shake vigorously for at least 30 seconds before spraying to ensure a consistent and dense foam.
• If the can is too cold or too hot, immerse it in warm or cold water, or leave it at room temperature until it reaches room temperature.

Attach the can & ready to fire!

5. SPRAY IN LAYERS:

• Hold the can upside down during application.
• Maintain the right distance : 12–18 inches from walls and 6–8 inches from ceilings.
• Apply in thin layers : For a total thickness of 2 inches, use at least 3 layers. Avoid overfilling in one pass.
• Shake the can between applications for even, high-quality coverage.

6. CLEAN LIKE A PRO

• Wipe the gun and nozzle immediately after use.
• Use Kraken Bond Foam Cleaner for fresh foam.
• Once cured, foam can only be removed mechanically.
• Protect cured foam from UV rays by covering it with plaster, paint, or another coating.

7. HELPFUL TIPS:

• Every can comes with two replacement tips for convenience.
• For consistent results, test spray on a scrap surface first.
• Roof Application Tip: For best adhesion on roofs, clean the roof deck thoroughly and lightly mist the surface with water when temperatures are above 32°F. If applied too close or too heavily, foam can bounce off the surface instead of bonding properly. Keep the recommended 6–8 inch distance from the roof deck and apply with the gun set appropriately for a controlled output. Dust, loose granules, oily spots, skipping the water mist step, or spraying too close may reduce adhesion or cause foam separation.
• Contact support promptly for troubleshooting if coverage or expansion seems below standard.

ventajas:

* Adhesión excepcional para la mayoría de los materiales de construcción,

*  Fácil de aplicar en superficies irregulares y difíciles de alcanzar donde se piensa utilizar materiales aislantes tradicionales,

* Excelente valor R: 5,66 por pulgada y valor de aislamiento térmico 0,025 W/(m.K),

*  No permite la formación de puentes térmicos.

*  No permite la formación de punto de rocío.

*  Rendimiento de hasta 20 pies tablares con 1 pulgada

espesor si se aplica desde una distancia de ~16 pulgadas con una velocidad de aplicación normal,

*  Gracias a su estructura densa, puede detener el agua, el aire, los insectos, etc.

* Se puede pintar.

Áreas de uso:

Elementos estructurales de edificios, áticos, sótanos, aislamiento de paredes interiores, balcones, logias, puertas, pendientes de ventanas, tuberías, canales,
y superficies redondas tipo tanque,
irregulares y ásperas todas las superficies,

Cubiertas, áticos, fachadas, cimientos,
sótanos, suelos, paredes interiores, solapes entre plantas, tabiques interiores, techos y sótanos. Carrocerías y remolques de automóviles, barcos, yates, embarcaciones y todo tipo de vehículos marítimos.

Instalar TDS

• Curing is dependent on temperature and humidity.
• Do not use in poorly ventilated spaces or areas exposed to direct sunlight without protection.
• Lower temperatures can decrease yield and curing time.
• Store properly in the original container; shelf life is 18 months.
• Contains diphenylmethane-4,4'-diisocyanate. Use in a well-ventilated environment and wear protective gloves. Keep away from direct sunlight and temperatures above 122°F.