The cans should be kept at room temperature for at least 12 hours before the application if cans are stored below/above storage temperature.
Properties
Outstanding adhesion for most building materials,
Easy to apply uneven, hard-to-reach surfaces where it is very hard to use traditional insulation materials,
Excellent R-Value: 5.66 per inch and thermal insulation value 0.025 W/(m.K),
Does not allow the formation of thermal bridges.
Does not allow the formation of dew points.
Yield up to 10 board feet with 16 oz, 20 board feet 28.7 oz for 1-inch thickness if applied from a distance of ~16 inches with normal application speed,
Thanks to its dense structure, it stops water, air, bugs, etc.
Can be painted.
Color may vary.
Application Areas
Structural elements of buildings, attics, crawl space, interior wall insulation, balcony, loggia, doors, window slopes, pipes, canals, and tank kind round surfaces, uneven and rough all surfaces,
Car body and car trailers, boats, yachts, vessels, and all kinds of sea vehicles.
Excellent R-Value: 5.66 per inch and thermal insulation value 0.025 W/(m.K), Yield up to 10 board feet with 16 oz, 20 board feet 28.7 oz for 1-inch thickness if applied from a distance of ~16 inches with normal application speed
A maximum of 1-inch thickness should be applied in a single batch. If more than 1-inch thickness application is needed, a minimum of 30 minutes should have waited between each surface, and the surface should be sprayed with water before the next application.