Drywall & Panel Adhesive Foam + Spray Gun & Cleaner Bundle

Hang board faster with adhesive foam, the applicator gun, and the cleaner in one bundle.

Drywall & Panel Adhesive Foam bonds up to 150 sq ft (14 m2) of board per can, which cuts both the mechanical fixings and the time spent on them. The gun lays the bead where the stud is, and the cleaner keeps the gun clear between sheets.

Pack sizes run from 1 can for a repair to 12 cans for a full room.

Features & Benefits

• Bonds up to 150 sq ft (14 m2) of board per can
• Reduces the number of mechanical fixings needed per sheet
• Lays the bead along the stud line through the applicator gun
• Grabs fast, so sheets hold while the next one goes up
• Covers a repair at 1 can and a full room at 12 cans

What's in the Bundle

Every option pairs the product with the tools the job needs, so nothing has to be ordered separately.

• 1 Pack: 1 can, 1 foam cleaner, 1 spray gun, safety glasses, gloves
• 2 Pack: 2 cans, 1 foam cleaner, 1 spray gun, safety glasses, gloves
• 12 Pack: 12 cans, 1 foam cleaner, 1 spray gun, safety glasses, gloves

Application Areas

This bundle suits 5 main areas of work.

• Drywall and plasterboard bonding
• Construction and decorative panels
• Insulation board to masonry
• Basement and garage linings
• Renovation and dry lining work

How to Use

Follow these 5 steps for a clean result.

1. Shake the can for 30 seconds and thread it onto the applicator gun.
2. Run beads along the stud lines and around the sheet perimeter.
3. Press the sheet on within 60 seconds and adjust while the foam is soft.
4. Support the sheet until the adhesive cures, about 60 minutes.
5. Flush the gun with the foam cleaner before storing it.

Specs

Drywall & Panel Adhesive Foam

These are the figures that decide whether the product fits the job.

• Can size: 24 oz
• Coverage: up to 150 sq ft (14 m2) per can
• Type: One component polyurethane adhesive foam
• Application: Gun use