Fastbond Adhesive Gun Foam - 24 fl oz.

Fastbond Adhesive Professional Foam is a high-performance, ready-to-use adhesive foam designed for quick and strong bonding of construction materials, particularly thermal insulation boards like XPS and EPS. Its easy application and efficient adhesion time provide an effective solution for various construction and insulation tasks.

Features & Benefits:

• Ready-to-use, gun-grade foam that requires no preparation. 

• Provides initial adhesion within 60 seconds, securing materials in place in about 5 minutes. 

• 30-40% more cost-effective compared to traditional insulation methods. 

• Free from harmful propellant gases, it is ozone-friendly. 

• Reduces labor costs with its fast and simple application. 

• Can be applied directly from the can without additional steps, saving time and effort.

Application Areas:

• Mounting insulation and finishing boards, especially thermal insulation materials (e.g., XPS, EPS). 

• Fixing stone or concrete products for permanent positioning. 

• Attaching polystyrene foam boards and cellular lightweight concrete elements. 

• Mounting decorative elements such as trims and moldings.

How to Use:

• Surface Preparation: Ensure that surfaces are clean, dry, and free from contaminants like dust, grease, and rust. Lightly moisten the surface to enhance adhesion.

• Can Preparation: Bring the can to room temperature (68°F) for optimal performance. If necessary, warm or cool the can by placing it in water.

• Adhesive Foam Application: Shake the can well, then attach it to the applicator and hold it upside down. Press the valve to apply foam. To avoid overflow on vertical surfaces, start at the bottom.

• Tooling and Finishing: After hardening the foam, apply plaster or paint to protect it from UV exposure. Use the entire can without long interruptions to prevent foam drying in the applicator.

• Cleaning: Clean any fresh foam with Foam Cleaner. Once cured, foam is hard to remove and may require mechanical cleaning.

Specs:

• Curing Mechanism: Moisture-based

• Full Curing Time: 24 hours

• Foam Color: Yellowish

• Yield: Up to 151 ft²

• Shear Strength: 130-140 kgf/cm²

• Ideal Can Temperature: 41°F to 86°F 

• Heat Resistance: -40°F to 194°F 

• Application Temperature: 41°F to 86°F 

Shelf Life: 12 months when stored properly

TDS