Xtreme Pro Fire Block Foam + Spray Gun & Cleaner Bundle

Firestop penetrations with a foam rated from -40°F to 194°F, plus the gun, the cleaner and the safety gear.

Xtreme Pro Fire Block Foam is the line built for conditions that defeat ordinary foam. This one stays stable across a -40°F to 194°F range, resists mold and water once cured, performs in dry and humid climates, and paints over for a finished look.

Crews buy fire block foam by the pallet, so the bundle scales the tools with the pack size instead of leaving an 864 can pallet with one cleaner. Sizes run from 12 cans to a full pallet, and the gun, cleaner and safety kit counts rise with the tier.

Features & Benefits

• Stays stable from -40°F to 194°F
• Resists mold and water penetration once cured
• Performs in dry and high humidity environments
• Paints over after curing for a finished appearance
• Scales tool and cleaner counts with the pack tier, from 12 cans to 864
• Delivers higher yield and less waste than straw applied foam

What's in the Bundle

Every option pairs the product with the tools the job needs, so nothing has to be ordered separately.

• 1 Pack: 1 can, 1 foam cleaner, 1 spray gun, safety glasses, gloves
• 2 Pack: 2 cans, 1 foam cleaner, 1 spray gun, safety glasses, gloves
• 12 Pack: 12 cans, 1 foam cleaner, 1 spray gun, safety glasses, gloves
• 24 Pack: 24 cans, 2 foam cleaners, 1 spray gun, safety glasses, gloves
• 48 Pack: 48 cans, 4 foam cleaners, 1 spray gun, safety glasses, gloves
• Half Pallet (432): 432 cans, 12 foam cleaners, 4 spray guns, 3 safety kits
• Full Pallet (864): 864 cans, 12 foam cleaners, 8 spray guns, 3 safety kits

Application Areas

This bundle suits 5 main areas of work.

• Fire rated wall and floor penetrations
• Service shafts and riser openings
• Electrical and plumbing sleeves
• Top and bottom plate gaps
• Multi unit and commercial firestopping

How to Use

Follow these 5 steps for a clean result.

1. Shake the can for 30 seconds and thread it onto the applicator gun.
2. Wear the supplied gloves and eye protection before dispensing.
3. Fill the penetration to about 50 percent and let the foam expand into the void.
4. Trim flush after 1 hour where the joint stays visible.
5. Flush the gun with the foam cleaner at the end of every session.

Specs

Xtreme Pro Fire Block Foam

These are the figures that decide whether the product fits the job.

• Can size: 24 oz
• Type: One component polyurethane, closed cell
• Application: Gun use
• Use: Fire block and firestop penetrations